0.5ml lab Glass Injection Syringe for Industrial Chemical Liquid Gas System
- Includes Device, Adapter and Needle (3 Pieces)
- Gas Tight Sampling Device
- 0.5ml Capacity
- 93mm Overall length
- Screw is 1/4-28UNF
- Capacity Glass Tube made of borosilicate glass
- Pushrod made of 304 stainless steel
- Entrance/Ex made of stainless steel and PTFE
- Piston made of PTFE
- 164g weight
Clean the glass syrine immediatedly after use
Cleaning process: 50g/l NaOH aqueous solution --- distilled water --- acetone and chloroform --- dry with a vacuum pump.
Ensure the needle core not to be stained and blocked from high boiling point material in the liquid. Do not use strong alkaline solution to wash it to prevent the glass tube and needle from being corroded and water&gas leakage.
Ensure correct operation and use carfully to ensure the needle and pushrod not be curved. Clean after usage and conserve into the box when unused.
The glass syringe is not suitable for absorb solusion with rough floating substance and used under high temperature. 10-100ml syringe needles can be made it through with 0.1mm stainless steel wire when blocked, it cannot be burned by fire because it will make needles loss the puncture ability.
When high boiling sample liquid condense in the syringe, please don't pull the rod forcibly to advoid blocking or wearing. If it is found darkening (stainless steel oxide) inside the syringe, you can dip a few soap water on the stylet, then pull back and forth several times to remove it.
Before accurate analysis, adjust it with pure water first.
Mount Prospect, IL USA
International Buyers – Please Note:
Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional charges.